OpenRC F1 Standard Rubber Tire Adapters

These are 3D printed adapters to allow the mounting of standard R/C F1 tires on the wheels from the original design.

After printing the included tires with both TPU and NinjaFlex I decided that it needed real tires.


Instructions:
Print 6x "Tire_Adapter_Supported" and 2x "Tire_Adapter_Supported_Front_Inner".

Print the original rear wheels as-is.

Print the narrow front rims included in this post. This will allow you to use the narrower front tires that the normal F1 cars use.