Thingiverse
E3D V6 Mount for Da Vinci PRO - Slight Modification To Zac Alsobrooks Design
7
Downloads
8
Likes
0
Makes
This is a very slight modification to Zac Alsobrooks E3D V6 Mount for Da Vinci PRO which can be seen here http://www.thingiverse.com/thing:1289659.
In the original design #4 metal screws were used to provide clamping for the two components. This remix replaces the #4 screw recepticles in the mount with an M3 nut mounting. The nut needs to be bonded in place with epoxy or similar but the part is dimensioned so the nut should be a firm press fit into the mount regardless (assuming common ABS sh
In the original design #4 metal screws were used to provide clamping for the two components. This remix replaces the #4 screw recepticles in the mount with an M3 nut mounting. The nut needs to be bonded in place with epoxy or similar but the part is dimensioned so the nut should be a firm press fit into the mount regardless (assuming common ABS sh
Sign in to leave a comment
Sign in