Thingiverse
Cablemount with zip ties
by Sl6der
28
Downloads
20
Likes
0
Makes
This is a cableholder or something other... I don´t know what it means in english, but it is very easy to understand, if you see the function of it.
It´s only 20x18mm and you can print 10pcs in less then 40mins with 30% infill and a layer of 0.3mm.
Explaination:
Use a 3M doublesided tape and fix the cablemount on a sureface. on the otherside use a zip tie and fiddle it inside the hole.
Now you can fix your cable easly wherever you want ;-)
It´s only 20x18mm and you can print 10pcs in less then 40mins with 30% infill and a layer of 0.3mm.
Explaination:
Use a 3M doublesided tape and fix the cablemount on a sureface. on the otherside use a zip tie and fiddle it inside the hole.
Now you can fix your cable easly wherever you want ;-)
Sign in to leave a comment
Sign in