Box for Orange PI Plus 2

PAY ATTENTION!!!!! this is still a work in progress

Feb 27, 2016
I finally printed and mounted the box. OrangePI plus 2 board fit quite properly.
The screw hole are not so in right position so I need to be more accurate (I'm talking of about 0,3-0,5mm so not so bad ;-) ).
I used:
- n.4 M3x25mm to mount the top cover
- n.4 wood screw 3.5x20mm (like in the picture with the screw on top of the fan). May be also a 3x20mm work fine.

Now I'm thinking on how to power the fan (which is 12V