Thingiverse
Box for CL1-GSM mobile phone remote relay
by HSB
5
Downloads
7
Likes
0
Makes
This is a box for a gsm remote relay to control a electric socket via SMS.
Don't mess about with high voltage if you don't know what you are doing.
It is very dangerous, you could get electrocuted or start a fire!
I find it difficult to print this in ABS as it warps. I used PLA in 0.45mm layers and a 0.5mm nozzel.
Use M3 nuts and bolts to assemble and a M6 eye bolt and lock nuts for a hook.
Use a 20x20x2mm plexiglass piece as window to see the status leds, or print a blind if you don't
Don't mess about with high voltage if you don't know what you are doing.
It is very dangerous, you could get electrocuted or start a fire!
I find it difficult to print this in ABS as it warps. I used PLA in 0.45mm layers and a 0.5mm nozzel.
Use M3 nuts and bolts to assemble and a M6 eye bolt and lock nuts for a hook.
Use a 20x20x2mm plexiglass piece as window to see the status leds, or print a blind if you don't
Sign in to leave a comment
Sign in