Thingiverse
Aurora A3 MK8 Extruder Strain Relief
by DaHai8
26
Downloads
10
Likes
1
Makes
This Should Work...
I'm still testing it, but it appears to take a lot of the bending/strain off the motor wires.
You'll need three mini zip ties to mount it.
The constant back-and-forth of the print head, bending the extruder motor plug wires ever so slightly finally took their toll. All four wire started to fail and the extruder motor started skipping. rendering prints a disastrous failure.
After painstakingly re-soldering all four wires to their micro-sized clips for the motor plug,
I'm still testing it, but it appears to take a lot of the bending/strain off the motor wires.
You'll need three mini zip ties to mount it.
The constant back-and-forth of the print head, bending the extruder motor plug wires ever so slightly finally took their toll. All four wire started to fail and the extruder motor started skipping. rendering prints a disastrous failure.
After painstakingly re-soldering all four wires to their micro-sized clips for the motor plug,
Sign in to leave a comment
Sign in