![FlashForge Creator Pro Spool holder (Spool 0.6[kg]) – 3D printable model from Thingiverse](https://wsrv.nl/?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2F41%2F7e%2Fa4%2F00%2F6c%2F3572ff2fd593415141d501b5725d2047_display_large.jpg&w=800&h=800&fit=cover&output=webp&q=80)
Thingiverse
FlashForge Creator Pro Spool holder (Spool 0.6[kg])
by Guyaros
9
Downloads
5
Likes
0
Makes
Spool holder for FlashForge Creator Pro 3D printer.
The holder designed to use with Small spool 0.6[kg], inner diameter 20.5[mm].
The spool holder made from 2 parts that connected together by tight fit or by glue (glue not mandatory).
I used Hex Bolt M10x60 to reinforce the structure, but its not mandatory, and it can be used without it.
This print require precise printing, because the parts fits each other in a tight fit.
If you choose to use a bolt, you will need a #17 spanner to t
The holder designed to use with Small spool 0.6[kg], inner diameter 20.5[mm].
The spool holder made from 2 parts that connected together by tight fit or by glue (glue not mandatory).
I used Hex Bolt M10x60 to reinforce the structure, but its not mandatory, and it can be used without it.
This print require precise printing, because the parts fits each other in a tight fit.
If you choose to use a bolt, you will need a #17 spanner to t
Sign in to leave a comment
Sign in