Prusa i3 Dampening Foot

Wanted something to reduce the vibration / noise from the printer to a minimumm, without too much increase in height (and reduced stability). This seems to work!

The springs i used were £2.49 for 100 from ebay - http://www.ebay.co.uk/itm/262144145934?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Also used some 6mm neophrene to the base for a bit more damping / anti-slip.

It can be tricky lining up the top and bottom sections - stand the springs on the bottom section and th