HICTOP Y-Axis Belt Tensioner Ver 2.0

Replaces the original Y-Axis Belt Tensioner for HICTOP 3DP-11 and 3DP-12 Aluminum frame printers. The acrylic original will crack and crumble under stress and can produce slippage on the Y-Axis as your bely wears or losens. Uses original M5 bolt and tee nuts and the original bearing M8 bolt and nut. Four bolt holes are 7.6mm wide and spaced 5mm on centers apart. Screw your M8 bolt right into the hole at the tension you need.

This thing was made with Tinkercad. Edit it online https://www.tinke