FanHolder for Printrbot Play

Replace the metal cover with 3 printed parts and you will be able to observe the process.

1. Remove the extruder, and unplug hotend and thermistor.
2. Guide the hotend wiring to the right side.
3. Mount the parts and reconnect the cable (make sure there is no stress on the cables).

The Ubis-FanHolder is a derivat of https://www.youmagine.com/designs/ubis-metal-hot-end-fan-shroud

BOM:
2 pcs M3 by 6mm screws for mounting the FanHolder to the extruder base.
4 pcs M3 by 16 screws for fi