Gaffer's Bench (glass blowing bench)

Design for a Gaffer's bench, will be adding 3D printed plugs for the ends of the square stock.
will need the following
217.45in of 1.75 x 1.75 square stock
168in of 1x2 rectangle stock
sheet of plywood
small pieces of .125in thick plate to form end stops
printer to print caps.
I will be fabricating this in the near future stand by for photos
3.24.2016 - assembly drawing added
4.12.2016 - welded up assembly 2 things changed from drawing
1. 1.25in square tube replaced all 1.75in