Thingiverse
Nefertiti
by 3dprinterlab
85
Downloads
79
Likes
1
Makes
Nefertiti model inspired by the blog post and Youtube video from RichRep (Richard Horne) http://richrap.blogspot.nl/2016/03/3d-printing-and-finishing-nefertiti.html
I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X * 200 Y * 220 Z build space), printed with a 0.4 mm nozzle.
After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the m
I had to cut the model into 11 pieces so it fitted my 3dprinterlab.org standard Prusa i3 (200 X * 200 Y * 220 Z build space), printed with a 0.4 mm nozzle.
After printing the parts I filled them with plaster and glued them together with epoxy. Then I sanded down the joint and gave it a coat of Zinc primer and sanded down the m
Sign in to leave a comment
Sign in