Thingiverse
144001 Top Shock Cap
door spacemanhux
19
Downloads
10
Likes
1
Makes
WLToys 144001 Top Shock Cap, 3D printable replacement.
I have found this is a common part to break, as repeated sliding upside down will wear away the plastic until there is little left and it splits.
The broken component can be removed from the stock shocks.
Print this component in the orientation uploaded.
This ensures the part is strongest in this loading application.
The original pivot ball can be press fit into the print with pliers or a vice.
If your print is rough, you may benefit from some light sanding so that rubber shock diaphragm seals well against the roof of the printed part.
This can be printed in PET-G, Nylon PA66 w/CF and
95A TPU would likely work as well.
I have found this is a common part to break, as repeated sliding upside down will wear away the plastic until there is little left and it splits.
The broken component can be removed from the stock shocks.
Print this component in the orientation uploaded.
This ensures the part is strongest in this loading application.
The original pivot ball can be press fit into the print with pliers or a vice.
If your print is rough, you may benefit from some light sanding so that rubber shock diaphragm seals well against the roof of the printed part.
This can be printed in PET-G, Nylon PA66 w/CF and
95A TPU would likely work as well.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!