LifeCam HD-3000 Rostock Printer Mount

Simple bracket to attach Hd-3000 webcam to upright towe on the Rostock Max v2.

I used the instructions here to open camera and replace stock bracket: https://astrophotovideo.wordpress.com/adapting-a-webcam-to-a-telescope/

You'll also need:
1x m3x30 bolt
1x m3 plain nut
2x m3 washers
2x m2x10 self threading bolts

Start the m2x10 self tap through the tower nut but leave it loose. You can then insert it into the channel, turn 90 degrees and (pulling it out slightly) tighten.