Qidi Tech Glass Plate Clips for 1/8" and 1/4" glass, 6-32 Screw

This is a remix of the Glass Build Plate clips by FrankenForge. I increased the size of the slot to work with 6-32 screws. It should still work with M3 screws also. The clip height works with both 1/8" and 1/4" glass. This is specifically designed for the Qidi Technology 3D printer but it should still work for the Flashforge.

Included are two designs, with and without a slot for the nut on the bottom of the heater PCB. The nut slot width is 7.5mm wide.

I design this in Solidworks 2016