Thingiverse
Bosch IXO III Electric Screwdriver (13mm Drill Chuck Adapter)
by MrTechAgent
24
Downloads
16
Likes
0
Makes
Bosch IXO III Electric Screwdriver (13mm Drill Chuck Adapter)
You can print in either PLA or Nylon, I recommend Nylon but PLA will work, the fit is very tight and you'll might use a Hammer to get it fixed into the Chuck assembly, you might need to use the Screwdriver torque to get it through, this is meant to be a removable system hence it won't be very secure for heavy applications.
I used a very big chuck which is linked for reference - http://www.amazon.in/Hitachi-401506-Drill-Chuck/dp
You can print in either PLA or Nylon, I recommend Nylon but PLA will work, the fit is very tight and you'll might use a Hammer to get it fixed into the Chuck assembly, you might need to use the Screwdriver torque to get it through, this is meant to be a removable system hence it won't be very secure for heavy applications.
I used a very big chuck which is linked for reference - http://www.amazon.in/Hitachi-401506-Drill-Chuck/dp
Sign in to leave a comment
Sign in