wanhao i3 Y-Axis Belt Tensioner

For easier installation and tightening of the Y-Axis belt on a Wanhao Duplicator i3. Requires a M3x30 screw and a M3 lock nut....(or just do what i did and use a m3x20 screw on the nut side and not use a nut at all)

Y_Axis_Tensioner.stl: you need to cut the belt to use this version.

Y_Axis_Tensioner_ALT.stl: you DON'T CUT the belt to use this version.

Y_Axis_clip.stl: the part that makes this a "Tensioner", and the part that needs a M3 screw.