Thingiverse
Sunhokey I3 12mm Inductive Sensor Adapter V2
by kauz
14
Downloads
9
Likes
0
Makes
This is an improved version of www.thingiverse.com/thing:1029784/#files
featuring 4 adjustment bolts allowing for more accurate height adjustment of the inductive sensor. Also, the tip of the sensor has to be level i.e. parallel to the build plate, which can be done with the adjustment bolts as well. If the tip of the sensor is not parallel to the build plate, it might collide with the printed workpiece resulting in step losses.
You will need 4 M3 bolts (>30mm) and nuts, as well as 4 strong
featuring 4 adjustment bolts allowing for more accurate height adjustment of the inductive sensor. Also, the tip of the sensor has to be level i.e. parallel to the build plate, which can be done with the adjustment bolts as well. If the tip of the sensor is not parallel to the build plate, it might collide with the printed workpiece resulting in step losses.
You will need 4 M3 bolts (>30mm) and nuts, as well as 4 strong
Sign in to leave a comment
Sign in