Thingiverse
Coast Knives 5-Point Pivot-Screw Tool
by blecheimer
15
Downloads
7
Likes
0
Makes
This is a little tool for the pivot screw of the Coast-Knives' FX352.
Coast-Knives is using a screw with a 5-point head for the pivot joint. To adjust the knife's folding mechanism you need a special tool.
For the tool you need five steel rods Ø1.2mm x 4mm.
Depending on your print material you may need to scale the object a little bit to match the screw. Try a setting of 99% or 101% if your first print does not fit on the screw.
Disclaimer:
Due to the recent incidents (things appearin
Coast-Knives is using a screw with a 5-point head for the pivot joint. To adjust the knife's folding mechanism you need a special tool.
For the tool you need five steel rods Ø1.2mm x 4mm.
Depending on your print material you may need to scale the object a little bit to match the screw. Try a setting of 99% or 101% if your first print does not fit on the screw.
Disclaimer:
Due to the recent incidents (things appearin
Sign in to leave a comment
Sign in