Nozzle/slicer calibration test

Nozzle/slicer calibration test. You can test if your selected slicer settings will print an object of set wall thickness. Then print this test object to check your print quality at each size to ensure the best wall thickness for printing thin walls/small objects.

Object wall diameters in following increments
0.20mm
0.25mm
0.30mm
0.35mm
0.40mm
0.45mm
0.50mm
0.55mm
0.60mm
0.65mm
0.70mm
0.75mm
0.80mm
0.85mm
0.90mm
0.95mm
1.00mm