Thingiverse
Pergo Use CHEAPER 3" Chlorine Tablets in your Spa!
by Pergo
42
Downloads
29
Likes
0
Makes
Print settings is !VERY! important
Print 6-8% infill !!!! Solid plastic does NOT float!
The lower you can print infill the better
2.0 mm shell/walls as any thinner and it will not be water tight.
^-- at least 5 shells (.4 x 5=2.0mm or .8 x 3 =2.4mm)
I did print with both .4 mm and .8 mm nozzles and both worked fine.
the .4 mm version looks better, the .8 version takes 1/4 the time to print.
PLA only lasts about solid 4 months before you will need another one. Mine is still ok but the
Print 6-8% infill !!!! Solid plastic does NOT float!
The lower you can print infill the better
2.0 mm shell/walls as any thinner and it will not be water tight.
^-- at least 5 shells (.4 x 5=2.0mm or .8 x 3 =2.4mm)
I did print with both .4 mm and .8 mm nozzles and both worked fine.
the .4 mm version looks better, the .8 version takes 1/4 the time to print.
PLA only lasts about solid 4 months before you will need another one. Mine is still ok but the
Sign in to leave a comment
Sign in