Thingiverse
BBP1S_LCD_Case
by dendad51
6
Downloads
5
Likes
0
Makes
A case for the BBP1S LCD.
On the front, the push button hole may need moving a bit, or modifying to fit a button.
M3 x 15 countersunk screws are used to hold the front and back together, and M3 x 18 hex brass spacers are the nuts.The mount is screwed onto the hex spacers with M3 x 12 screws.
I couldn't find M3 x 15 countersunk screws in my stash so round heads were used.
The Mount_3 goes on the fan holes on the FastBot BBP1S case.
http://www.thingiverse.com/thing:946428
The back now h
On the front, the push button hole may need moving a bit, or modifying to fit a button.
M3 x 15 countersunk screws are used to hold the front and back together, and M3 x 18 hex brass spacers are the nuts.The mount is screwed onto the hex spacers with M3 x 12 screws.
I couldn't find M3 x 15 countersunk screws in my stash so round heads were used.
The Mount_3 goes on the fan holes on the FastBot BBP1S case.
http://www.thingiverse.com/thing:946428
The back now h
Sign in to leave a comment
Sign in