Multi Use Stand

A height, angle, and position adjustable stand. Can hold a book, magazine, tablet, drink, or small plate. Extrusion used is 2020 V-Slot. I printed this in PETG.

Needed:
1.6 meters of 2020 V-Slot extrusion
4x 625ZZ bearings
14x M5 T-nuts
14x M5x10mm cap head bolts
2x M5x50mm cap head bolts (for pivoting joints)
2x M5x40mm cap head bolt (for vertical clamp and toothed pivot)
3-5x M5 washers
2 M5 nuts (standard)

2 Printed Nut Holders:
http://www.thingiverse.com/thing:641854
OR
h