Thingiverse
155mm Wall Shelf / PC Bracket
by Sheo3DP
0
Downloads
1
Likes
0
Makes
I spent hours looking for a wall bracket to mount my HP Elitedesk 800 G3 TWR to no avail, however I found the PC wall bracket uploaded by Brevill and it was exactly what I wanted except for the size, so inspired by his design I made this.
This could also be used as a regular shelf if you put a plank of wood across the brackets, though I'd use at least 3 brackets to distribute the weight. For reference, the height of the notch at the end is 2cm, so i would recommend a plank or groove of that depth.
Update 26/07/2025 - Added Bracket V2 - Hole.
- Added a 12mm hole on the shelf arm for ethernet and other wires to be passed through.
- Blended the face and arm together which should help prevent against snaps.
- The length of the usable shelf area has been increased to 160mm.
- The face has increased in thickness from 5mm to 7.5mm.
This could also be used as a regular shelf if you put a plank of wood across the brackets, though I'd use at least 3 brackets to distribute the weight. For reference, the height of the notch at the end is 2cm, so i would recommend a plank or groove of that depth.
Update 26/07/2025 - Added Bracket V2 - Hole.
- Added a 12mm hole on the shelf arm for ethernet and other wires to be passed through.
- Blended the face and arm together which should help prevent against snaps.
- The length of the usable shelf area has been increased to 160mm.
- The face has increased in thickness from 5mm to 7.5mm.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!