Jumper 260+ quad conversion parts, New arms, FPV transmitter holder, Sony CCD camera conversion + misc

The new arms are designed to hold the ESC with just friction and a small dab of hot glue (no zip ties needed!) they also have an expected failure point (by design) at the posts to avoid transferring a hard impact onto the mainboard, built in 28mm motor guards. Note: These arms will also work with littlebee 20amp escs as they are the same width as the stock bhheli long 20amp escs with the jumper quad.

FPV transmitter is hot glued in with 1 or two zipties over top to keep it pressed down in the