Malyan M150 Leveling M3 NylocThumbwheel

This is a Malyan M150 Bed Leveling Thumbwheel. It was designed to clear the front/back rails and maximize grip leverage on M3 nylock nuts. Using nylock nuts on the bed leveling posts will keep the level in-tune longer which will give you more consistent first layer adhesion.

Print at 50% fill for strength.
Print four thumbwheels.

Additional hardware required:
- four M3 nyloc nuts
- four M3 washers

The tolerances in this print are tight.
- Use an M3 screw to verify the hole is clear