Moineau paste extruder v1.1

Tested, works but not suitable for thick materials, like clay. Gears break as they are not running in gears.

Paste extruder, currently testing on my delta printer. It is geared down with 8:13:8:13. It is mounted onto the effector with three screws. A hole pattern on a 40mm circle.

You might want to tweak the rotor a little bit, the model is compensating for error of my 3D-printer (0.4 nozzle). Later i will upload a series of rotor diameters. Also you need to design an adapter to fit it to