Thingiverse
15mm D6
door thoromyr
13
Downloads
7
Likes
0
Makes
Why more dice? Because I modeled freeware dice a while back and thought it'd be nice to print them.
In this set only the six-sided die is represented. Two dice models are provided, one sized to 15mm and the other to 3/4 inch. Both have slightly rounded edges and modeled pips. Although they are somewhat easier to read than the photo indicates they would be easier to read with good markings.
To round things out for those with dual extruders, the 15mm has three additional files: one with cylindrical pips and the other two for pips.
Please note: as with any 3d printed dice these will only be as good as your printer. Your mileage may vary, but the ones I have printed are not accurate. For example, printing the 15mm d6 at 12mm the sides measured 11.73mm x 11.95mm by 11.91mm.
In this set only the six-sided die is represented. Two dice models are provided, one sized to 15mm and the other to 3/4 inch. Both have slightly rounded edges and modeled pips. Although they are somewhat easier to read than the photo indicates they would be easier to read with good markings.
To round things out for those with dual extruders, the 15mm has three additional files: one with cylindrical pips and the other two for pips.
Please note: as with any 3d printed dice these will only be as good as your printer. Your mileage may vary, but the ones I have printed are not accurate. For example, printing the 15mm d6 at 12mm the sides measured 11.73mm x 11.95mm by 11.91mm.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
