16-tier stringing test scaffold

This model tests four variables/settings per print, and enables regression calculations. 41 minutes and 3g per print.

Simply use the Cura project uploaded with a .4mm nozzle to check effects on temperature 225-230C, travel speed 125-150mm/s, print speed 45-50mm/s, and fan speed 75-100%. Then check the print to see which one has least amount of stringing!

Notes:
1. Ensure model height is scaled to layer height. For example, with .28mm layers,
Model height = .28mm/layer x 18 layers/tier x 16 tiers = 80.64mm
2. Tier 1 is at the bottom, Tier 16 is at the top. Don't mix them up as the order is opposite on the spreadsheet.