Blade Inductrix Camera Mount (V1.Y) TINY WHOOP Y-mod

After using the TINY WHOOP V1 mount I found it hard to print unless you have a very high ress (20Micron) printer

This mount is modified to be stronger but still weigh 0.8 grams.
I removed some (useless) material between the 3 screw attachment legs but made the actual camera mount a bit thicker so it is easier to print at 50 or even 100 Microns but still have the same weight.

My M3D printer was set to medium-low quality with the highest infill possible in the software.

Already had allot