Table Saw Fence Rail Replacement Handle

This handle can be used for many things but was designed for a Sears/Craftsman Table Saw Model Series 113.xxxx Fence Rail to tighten the rail down.
Once you put it together there should be a gap at the seam.
I made the tip end nut pocket a tad shallow to insure the nut didn't have room to play and wearing out the plastic once the handle pieces were glued tightly together.

Recommended settings:
Layer: .2-.25
Walls: 3-4 ( I did 5, i was over kill)
Fill: 35-50% (50% felt a little on the