Prusa i3 Upgrades: PrintHead

Designed for an E3D v5 hot-end, this Print head was made with the idea to maximize your Z axis travel or build height, it allows for an increase to about 180mm ~ 190mm depending on your print bed height.

Hotend: E3D V5

Screws:
2× (M3×8mm)
2× (M3×12mm) angle bracket
4× (M3×16mm) fan shroud
10× (M3×20mm)
1× (M3×40mm)
3× (M3×25mm)
10× Nut M3

Misc:
1× Fan 50mm
1× Fan 30mm
2× LED 5mm
1×Induction sensor
1×Spring
Small cable ties


**Set the new Z value with M211 command.