Thingiverse
Pollin case enclosure geiger counter
by MSpencer
9
Downloads
3
Likes
0
Makes
Small case for Geiger counter kit from Pollin Electronic (www.pollin.de Part no. 810 223).
Simple case with access to LEDs, switch and display. Has a little 9V-box and a rear cover.
Designed to be printed without supports.
The PCB is hold in place by little postst and the rear cover should fit firmly.
The counter tube is accessible from the side - do not touch the tube while the counter is running ( High voltage!).
0.15 to 0.25mm slices with a 0.35/0.4mm nozzle should work fine with PLA
Simple case with access to LEDs, switch and display. Has a little 9V-box and a rear cover.
Designed to be printed without supports.
The PCB is hold in place by little postst and the rear cover should fit firmly.
The counter tube is accessible from the side - do not touch the tube while the counter is running ( High voltage!).
0.15 to 0.25mm slices with a 0.35/0.4mm nozzle should work fine with PLA
Sign in to leave a comment
Sign in