180mm X Quad Frame

The arms were cut from 1/8" G10 and the rest of the plates were cut from 1/16" G10. The frame was designed around using a 26mm cased fpv camera such as a Runcam Swift or HS1177, the top plate was designed to mount an ET200R VTx or other transmitters with a similar footprint.

You will also need:
4 x 1/4" 4-40 button head screws
4 x 1.5" long 3/16" Hex size 4-40 Aluminum standoffs
12 x 3/8" 4-40 button head screws
8 x 4-40 thin nylon insert locknuts

Assembly is pretty easy simply by look