davinci-Bernie

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5WFygwAahyB

this is a holder for the bernie simple extruder.
fixed on a davinci 1.0a.
You need to drill 3 new holes in the holder(3 mm) for the fixing in davinci.

the two holes for the extruder have to be drilled to 3mm(2 to 3 mm) . At the moment the holes are still manually since it is a first draft . But this is not a problem

.you need 5 m3x20 mm screws an nuts.