Rostock Max v2 Enclosure

These are the brackets needed to make an enclosure for your rostock max v2. You will need 3 base and 3 top pieces. You can print 3 at a time with the build area.

Locate the brackets on the extrusions and bolt the brackets to the rostock's top and base using 6-32x.75" bolts with nuts (M3 x20mm bolts will work too). You will need to drill holes in your printer. I used one sheet of 36" x 48" x .093" acrylic http://www.homedepot.com/p/OPTIX-36-in-x-48-in-x-093-in-Acrylic-Sheet-MC-09/2020380