Stabilized Roll Axis Canard Rocket [NAZE32 Board]

The roll actuation module was designed in AutoCAD. The module was designed to
be a section of the rocket’s external airframe. I also included an exhaust manifold that allowed the parachute charge to flow through the module. It was 3D printed and the 12 gram digital metal gear servos were installed in their compartment. The 2.4 GHz receiver, 850mAh 7.4 volt battery, and the SBEC (power supply) were installed in the module. The NAZE32 quadcopter flight control board was then installed over the ot