Threadless Ballscrew Nut (5 degree tilt for 16mm shaft)

This is another design for threadless ballscrew nut.

The nut relies on friction of the shaft and bearings to grip, and move by turning the nut or the shaft.

You'll need:
1. M6 x 47mm screws x3
2. M6 x 20mm screw x1
3. M6 x 11mm x 1mm spacers x6
4. M6 nuts x3 (or x6 if you want to "lock" the nuts in place)
5. M6 square nut x1
6. 626 bearings x6

You want to print 2 identical pieces and put the back-to-back, place the square nut in the slot for the adjustment screw, and screw the bea