Mod of shawdreamer's design PrintRite DIY Ramps 1.4 housing for more clearance and access to SD card.

This is a Mod of shawdreamer's design to give more room for wiring and access to SD card for us old guys with fat fingers. Also added a port inline with usb connection for computer connection . All hardware is m2 stainless . I used finger nail polish for loctite.

I added a reset button so I didnt have to unplug to reset. Drilled a hole in housing over button on ramps board. Put a #8 screw in the guide from the bottom added a spring on top and screwed on the red button. Then glued the assy in