Thingiverse
SOHO
by a43nigam
6
Downloads
6
Likes
0
Makes
SOHO 3d print suggestions
• No support required
• STL files have been test printed at both 0.2mm and 0.1mm layer height
• (Optional) For added print quality use support material for SOHO_Part3
• ABS and PLA plastic filament have been tested successfully
Assembly
1. Remove printed parts from print bed
2. Clean up parts as necessary. Some printers may deposit extra material for the first layer that may need to be removed.
3. Press fit SOHO_Part2 and SOHO_Part3. Use the two pins on the to
• No support required
• STL files have been test printed at both 0.2mm and 0.1mm layer height
• (Optional) For added print quality use support material for SOHO_Part3
• ABS and PLA plastic filament have been tested successfully
Assembly
1. Remove printed parts from print bed
2. Clean up parts as necessary. Some printers may deposit extra material for the first layer that may need to be removed.
3. Press fit SOHO_Part2 and SOHO_Part3. Use the two pins on the to
Sign in to leave a comment
Sign in