Thingiverse
Wio Link Case
by shamrage
26
Downloads
18
Likes
2
Makes
Wio Link + Battery Compartment
Materials Needed:
4pcs M3 screws with nut
Optional:
Double sided tape to hold the battery
v.1.1
The cover has .5mm spacing on all sides from the base. The Wio Boards was not gonna fit, you need to cut or file on some edges inside the case to fit the wio board. You will need 4 M3 screws to mount the board at the cover (facing down). This is a work in progress version, i did not recommend printing it.
v.1.2
> The .5mm spacing was removed to make
Materials Needed:
4pcs M3 screws with nut
Optional:
Double sided tape to hold the battery
v.1.1
The cover has .5mm spacing on all sides from the base. The Wio Boards was not gonna fit, you need to cut or file on some edges inside the case to fit the wio board. You will need 4 M3 screws to mount the board at the cover (facing down). This is a work in progress version, i did not recommend printing it.
v.1.2
> The .5mm spacing was removed to make
Sign in to leave a comment
Sign in