Thingiverse
Da Vinci 2.0: Quick! E3d V6 conversion
by ebat
19
Downloads
10
Likes
0
Makes
These two small parts (cap and mount) can be used to convert your da vinci 2.0 duo to a single extruder E3d V6 without having to print an entirely carriage.
The cap does not need supports and I chose to print the mount with supports to minimize clean up. I also removed the second stepper motor on the carriage which has reduced weight significantly and has allowed me to print at 80mm/s without resonance in the x or y direction.
In Repetier EEPROM setting, I changed the lowered max z-axis
The cap does not need supports and I chose to print the mount with supports to minimize clean up. I also removed the second stepper motor on the carriage which has reduced weight significantly and has allowed me to print at 80mm/s without resonance in the x or y direction.
In Repetier EEPROM setting, I changed the lowered max z-axis
Sign in to leave a comment
Sign in