Goby 210 mods

A few parts I am using on my Goby 210. Parts are printed in PETg and TPU. Camera mount is designed for the Runcam Swift, the vtx mount is designed for video transmitters with a cable to the sma connector. the camera action Cam mount is designed for a SJcam M10 and secured with velcro. the holes are setup to accept a M3 screw to thread into them. go slow and make sure the holes arent too small after printing.

There are to VTX and RX antenna options, the first is the normal vtx mount coupled with the rx mount with no holes, it is taped to the top frame. The other option is to print the short VTX mount and use the RX mount with holes and stack them under the rear holes in the top plate.