Coax2805-V1

Pitch and roll parts to print with 0.1mm layer and 100% infill.
Frame to print with 0.1mm or 3mm layer and 20% infill.

You will need:
- 2 servos like Graupner des271 BB
- 1 CR motor from HIMAX CR2805, supplied prop will work but the flight time will be reduced, try the T-motor 9x3 carbon props for the best efficiency,
- 2 10A brushless ESC
- 12mm clevis, 2mm threaded rod and 1,6mm screw for commands
- 2 M6 wing fixation to attach the roll plate on the pitch plate (like in the pic)
- 1