Gopro stabilizer (GlideCam)

glidecam-style stabilizer for gopro. made to use 4 common 608 skate bearings.

Hardware:
4X 608 skate bearings
1X threaded rod (6/32 used, max size is inner dia. of bearings (8mm), would need to 'cut' new hole in actual mount)
11X 6/32 nuts (3X if using different sized rod (and 8 of that size)
3X 6/32 machine screws (3/4 inch or longer)
11X #6 washers (stacked ones seen inside gimbal are needed if not cutting 15mm M3 screws to size)
7X M3 Machine screws (4X 30mm and 3X 15mm (may need to