Thingiverse
K40 Laser PSU bracket V2
by HCP
201
Downloads
76
Likes
2
Makes
This is V2.
The K40 laser is a good machine that needs alot of mods to work well.
With this bracket you can mount the PSU of the machine 90 degree tilted, so it will use the air in the room to cool the PSU, rather than using the heated are inside the laser for cooling.
Theese brackets are made for PSU with width of 144mm and height of 79mm.
If you have another size, send a comment and i will add your PSU type too!
Please note, the electronics in theese machines are sometimes bad, fo
The K40 laser is a good machine that needs alot of mods to work well.
With this bracket you can mount the PSU of the machine 90 degree tilted, so it will use the air in the room to cool the PSU, rather than using the heated are inside the laser for cooling.
Theese brackets are made for PSU with width of 144mm and height of 79mm.
If you have another size, send a comment and i will add your PSU type too!
Please note, the electronics in theese machines are sometimes bad, fo
Sign in to leave a comment
Sign in