Brackets for Acrylic Box Enclosure

These are brackets that I used to assemble an acrylic box enclosure for my printer. They are designed to work with 1/8" * acrylic, which can be purchased at any hardware store. If you use all of the screw holes (except the bottom 8!), you should use 72 M3x12mm screws, 72 lock nuts, and 144 washers. I don't know that the washers are strictly necessary, but they can be purchased on Ebay in hundred packs for a dollar or two.

* 1/8" acrylic is actually ~0.10 inches in thickness.