Thingiverse
Traxxas Rod Jig for 40mm V Slot Aluminum Extrusion
by thehebs
10
Downloads
3
Likes
0
Makes
This is a remix of Thews'/Justin Edwards' traxxas rod jigs for 1 or 3 rods.
I personally recommend doing 1 rod at a time, using the center slot in the jigs. However, if you want to do 3 at a time, be sure to test fit well to make sure that the jigs are perfectly lined up, to prevent any kind of differences in length between the top and bottom rods in the jig.
8/24/2016 - I only had 16mm m5 bolts which were bottoming out with the original 7.5mm thickness of the mounting bracket. I extruded
I personally recommend doing 1 rod at a time, using the center slot in the jigs. However, if you want to do 3 at a time, be sure to test fit well to make sure that the jigs are perfectly lined up, to prevent any kind of differences in length between the top and bottom rods in the jig.
8/24/2016 - I only had 16mm m5 bolts which were bottoming out with the original 7.5mm thickness of the mounting bracket. I extruded
Sign in to leave a comment
Sign in