Printrbot Lasercut Print Bed

This design is for a Printrbot with threaded rods at the base, Y and X smooth rods, and a sq. heated bed. The design is ~10.5 in. by ~13 in.

There's also a design that is made up of 4 pieces which attach together with 8 short #6 bolts.

There are 2 pairs of 2 holes for the belt clamps.

There are 4 holes closest to the middle for mounting a x heated build plate.

The 4 holes closest to the outside are for the Y Bar Clamps.

02/17 Update: Made the Y-bar holes wider to allow for so