Thingiverse
Wind Mill - Aluminium and PETG
by viorelspinu
41
Downloads
32
Likes
0
Makes
This is inspired by - http://www.thingiverse.com/thing:7487 .
After some play, I decided I do not want the 3D print the wings. It takes ages for a large wind mill. Therefore, I decided to use 1mm thick Petg Copolyester sheets (90 cm x 60 cm each wing).
Things you will need for one mill (in all the pictures you see those materials x 2, as I've built two mills):
- 4 X 1 meter long M8 threaded rods
- 2 x 1 meter long M10 threaded rods
- 2 X 1 meter long aluminium bars
- 2 x 10 cm long
After some play, I decided I do not want the 3D print the wings. It takes ages for a large wind mill. Therefore, I decided to use 1mm thick Petg Copolyester sheets (90 cm x 60 cm each wing).
Things you will need for one mill (in all the pictures you see those materials x 2, as I've built two mills):
- 4 X 1 meter long M8 threaded rods
- 2 x 1 meter long M10 threaded rods
- 2 X 1 meter long aluminium bars
- 2 x 10 cm long
Sign in to leave a comment
Sign in